Oscillator Conveyors

Transfer hot, dry or wet abrasive metal scrap or finished parts across horizontal distances

PRAB Oscillator Conveyor This vibratory conveyor is the top choice for transferring hot, dry or wet abrasive metal scrap or finished parts across horizontal distances. The oscillator provides a steady movement of material at roughly 12.5 feet (3.81 meters) per minute.

Its durable, multi-ply fiberglass springs provide a smooth, quiet flow and discharge. Install your unit along side presses or in a pit beneath your presses. It's low cost per foot and low-cost operation make it an economical choice for any size shop.

Oscillator Conveyor In Action

Features

The low-maintenance eccentric single drive uses only four bearings
Lubrication points are centrally located for easy access and maintenance

Options

Trough designs are available in square or flared styles
Trough surfaces come in smooth, urethane, abrasion resistant or rigidized steel
Screening and sorting configuration available with side discharge chute

Choose from three models to meet your specific application needs. See chart below for detailed information.

Models	Light Duty	Standard Duty	Heavy Duty
Single Drive Conveyor Length	Max. 50' (15 m)	Max. 80' (24 m)	Max. 200' (60 m)
Trough Thickness	10-7 gauge (3.42-4.55 mm)	10-7 gauge (3.42-4.55 mm)	7 gauge / 0.25 (4.55 mm / 0.64 cm)
Frame Base Steel	Structural angle and channel	Structural angle and channel	I-beam
Stroke Movement	0.3125-0.5 in (0.79-1.27 cm)	0.3125-0.5 in (0.79-1.27 cm)	0.375-0.5 in (0.95-1.27 cm)
Conveyor Widths	8-16 in (20.32-40.64 cm)	8-60 in (20.32-152.4 cm)	18-60 in (45.72-152.4 cm)
Drive Section Location & Length	End or center 84-120 in (213.36-304.8 cm)	End or center 84-120 in (213.36-304.8 cm)	Center 120 in (304.8 cm)
Spring Spacing Down Length	48-60 in (121.92-152.4 cm)	48-60 in (121.92-152.4 cm)	84 in (213.36 cm)
Drive	Single arm eccentric	Single or double arm eccentric	Double arm eccentric
Multi-ply Fiberglass Reaction Spring	0.2in thickness (.50 cm)	0.2in thickness (0.50 cm)	0.31in thickness (0.78 cm)
Bearings	Double tapered roller bearings
Operation Frequency	400-600 RPM